Institutions | About Us | Help | Gaeilge
rian logo


Mark
Go Back
Mathematical modelling and optimisation of the formulation and manufacture of aggregate food products
Baş, Nurşin
In this PhD study, mathematical modelling and optimisation of granola production has been carried out. Granola is an aggregated food product used in breakfast cereals and cereal bars. It is a baked crispy food product typically incorporating oats, other cereals and nuts bound together with a binder, such as honey, water and oil, to form a structured unit aggregate. In this work, the design and operation of two parallel processes to produce aggregate granola products were incorporated: i) a high shear mixing granulation stage (in a designated granulator) followed by drying/toasting in an oven. ii) a continuous fluidised bed followed by drying/toasting in an oven. In addition, the particle breakage of granola during pneumatic conveying produced by both a high shear granulator (HSG) and fluidised bed granulator (FBG) process were examined. Products were pneumatically conveyed in a purpose built conveying rig designed to mimic product conveying and packaging. Three different conveying rig configurations were employed; a straight pipe, a rig consisting two 45° bends and one with 90° bend. It was observed that the least amount of breakage occurred in the straight pipe while the most breakage occurred at 90° bend pipe. Moreover, lower levels of breakage were observed in two 45° bend pipe than the 90° bend vi pipe configuration. In general, increasing the impact angle increases the degree of breakage. Additionally for the granules produced in the HSG, those produced at 300 rpm have the lowest breakage rates while the granules produced at 150 rpm have the highest breakage rates. This effect clearly the importance of shear history (during granule production) on breakage rates during subsequent processing. In terms of the FBG there was no single operating parameter that was deemed to have a significant effect on breakage during subsequent conveying. A population balance model was developed to analyse the particle breakage occurring during pneumatic conveying. The population balance equations that govern this breakage process are solved using discretization. The Markov chain method was used for the solution of PBEs for this process. This study found that increasing the air velocity (by increasing the air pressure to the rig), results in increased breakage among granola aggregates. Furthermore, the analysis carried out in this work provides that a greater degree of breakage of granola aggregates occur in line with an increase in bend angle.
Keyword(s): Population balance modelling; Breakage; Aggregation; Simulation; Probabilistic theory; Cereal products; Agglomeration; Probabilities; Mathematical models
Publication Date:
2010
Type: Doctoral thesis
Peer-Reviewed: No
Language(s): English
Institution: University College Cork
Citation(s): Baş, N, 2010. Mathematical modelling and optimisation of the formulation and manufacture of aggregate food products. PhD Thesis, University College Cork.
Publisher(s): University College Cork
File Format(s): application/pdf
Supervisor(s): Byrne, Edmond P.
Fitzpatrick, John J.
First Indexed: 2011-08-30 05:30:43 Last Updated: 2016-10-14 06:47:36